Clock basics, The clock system is 12-hours.), Initial time setting – Panasonic CQ-R825 Manuel d'utilisation
Page 17: Resetting the time, Selecting the clock display
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Clock Basics
(The clock system is 12-hours.)
P .J i
f 1LJ LJ
Initial Time Setting
® Press DISP. “AdJ” is displayed.
(B) Press and hold DISP again for more than 2
seconds. “12" blinks indicating the time set
ting mode is activated.
© To set hours, press “VTUNE” or “TUNEA”.
© Press DISP again for minute setting.
© To set minutes, press “VTUNE” or
‘TUNEA”.
Hold “A" or “V” to change numbers rapid
ly.
© When you have set the time, press DISP.
Resetting the Time
When you want to reset the time, press and hold DISP for more than 2
seconds to activate the time setting mode. Then, repeat step © to ©
above.
Selecting the Clock Display
Press DISP for clock display.
Press DISP once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode
remains on. When the PWR is pressed again, the system is com
pletely.
Note:
Before you leave your car that has no ACC, be sure to switch
power off.
CQ-R825/R805EUC
17