Focus or flange-back adjustment – Panasonic WV-BL730 Manuel d'utilisation
Page 14
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
FOCUS OR FLANGE-BACK ADJUSTMENT
The following adjustment should be made by qualified
service personnel or system installers.
3. Tighten the screws on the flange-back adjusting
ring.
1. Loosen the screws on the flange-back-adjusting
ring.
Focus adjust for
CS-mount lens
2. Turn the flange-back adjusting ring to the desired
position.
Caution:
When the C-mount tens is mounted, do
not rotate the ring counterclockwise by force
after it stops. If the ring is rotated by force, the
inner lens or CCD image sensor may be dam
aged..
-
12
-
Advertising