Panasonic WV-BL730 - Manuel (Page 10)

2. 24 V AC Power Supply
Connect the power cable to the AC/DC compatible
input terminal on the rear panel of the camera.
DC 12V AC 2«V
24 VAC, 60 Hz
(19.5V-28V)
Video Cable
1. it is recommended to use a monitor whose resolu­
tion is at least equal to that of the camera.
2. Set the termination switch to the 75il position on
the last monitor.
A. Use a 75C1 coaxial cable.
B. Set the termination switch to the 75il position
on the last monitor and to the Hi-Z position on
the other monitors. Do not change the posi­
tions after setting.
Recommended wire gauge sizes for 24V AC line.
Copper wire
size (AWG)
#24
(0.22mm=)
#22
(0.33mm')
#20
(0.53mm^)
#18
(0.83mm=)
Length
of Cable
(Approx.)
(m) 95 150 255 425
(ft) 314 495 S42 1,403
Caution:
To prevent fire or electric shock hazard, a
UL listed wire (VW-1, style 1007) should be
used for the cable.
Monitor Monitor
@ © 0
B
C. The maximum extensible coaxial cable length
between the camera and the monitor is shown
below.
-
8
-