Title display, Status display, Alarm display setting – Panasonic WJ-HD500 Manuel d'utilisation
Page 60: Border display, Title display setting (spot monitor)
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
• Title Display
This item lets you enable or disable the display of the cam
era and group title on the Multiscreen Monitor,
1. Move the cursor to the TITLE DISPLAY parameter in the
DISPLAY SETUP menu by pressing the
A
or ▼ button.
2. Select either ON or OFF by pressing the 0 or Q but
ton.
ON:
Enables the display of the camera and group title
on the monitor screen.
OFF:
Disables the display of the camera and group title
on the monitor screen.
The factory default setting is ON.
This item lets you enable or disable the display of the cam
era and group title on the Spot Monitor.
■ Title Display Setting (Spot Monitor)
1. Move the cursor to the TITLE DISPLAY parameter in the
DISPLAY SETUP menu by pressing the
A
or
T
button,
2. Select either ON or OFF by pressing the 0 or 0 but
ton.
ON:
Enables the display of the camera and group title
on the monitor screen.
OFF:
Disables the display of the camera and group title
on the monitor screen.
The factory default setting is ON.
• Status Display
This item lets you enable or disable the status display on
the Multiscreen Monitor.
1. Move the cursor to the STATUS DISPLAY parameter in
the DISPLAY SETUP menu by pressing the
A
or
T
but
ton.
2. Select either ON or OFF by pressing the 0 or 0 but
ton.
ON:
Enables the status display on the monitor screen.
OFF:
Disables the status display on the monitor screen.
The factory default setting is ON.
Alarm Display Setting
This item lets you enable or disable the alarm display on
the Spot and Multiscreen Monitor.
1. Move the cursor to the ALARM DISPLAY parameter in
the DISPLAY SETUP menu by pressing the
A
or ▼ but
ton,
2. Select either ON or OFF by pressing the 0 or
E)
but
ton.
ON:
Enables the alarm display on the monitor screens.
OFF:
Disables' the alarm display on the monitor
screens.
• Border Display
This item lets you enable or disable the display of borders
that divide the screen of the Multiscreen Monitor, or select a
border color.
The factory default setting is ON.
1. Move the cursor to the BORDER LINE parameter in the
DISPLAY SETUP menu by pressing the
A
or ▼ button.
2. Select the desired mode or color by pressing the 0 or
0 button,
OFF:
No border
WHITE;
White border
GRAY:
Gray border
BLACK:
Black border
The factory default setting is WHITE.
61