Panasonic WJ-HD500 - Manuel (Page 48)

As described before, the Multi Shot Recording is an event
recording function reacting to an alarm input.
It records the number of images in pre- and post-recording.
Pre-recording is the recorded images during standby, prior
to the input of the alarm signal.
Post-recording is the recorded images after the input of the
alarm signal.
These items let you determine the recording parameters for
Multi Shot Recording assigned in the program number
menu,
(continued from Program Timer)
■ Multi Shot Recording (Internal Timer)
1
,
Select the recording mode M/S in the program number
menu by pressing the 0 or Q button, then press the
SET button.
The selected Multi Shot Recording menu as shown
below appears on the monitor screen.
3-1-1-1 PROGl-KOl-Ql
M/S{EVEMT:MULTI SHOT)
REC SETUP
REC HOPE
REC RATE 15FPS
REC QUALITY SUPER FINE
PRE PICTURES 15
POST PICTURES 60
DYHAHIC REC OFF
- ------------------ ---------- —■ -- __ ^
2. Move the cursor to the REC RATE parameter in the
menu by pressing the A or T button, then select the
desired recording rate by pressing the (3 or Q button.
1 - 30FPS: Records the selected number of freeze
images every second.
0.5FPS; Records a freeze image every 2 seconds.
0.4FPS: Records a freeze image every 2,5 seconds.
0.3FPS: Records a freeze image every 3.3 seconds.
0.2FPS: Records a freeze image every 5 seconds.
0.1 FPS: Records a freeze image every 10 seconds.
The factory default setting is 15FPS.
♦ 30FPS is the active selection when the FIELO/FRAME
parameter in the COMMON REC SETUP menu is set to
FIELD ,
♦ 15FPS is the active selection when the FIELD/FRAME
parameter in the COMMON REC SETUP menu is set to
FIELD or FRAME 3D1M OFF.
FINE: For fine image quality (Compression Rate 1/10)
NORMAL: For normal image quality (Compression Rate
1/16)
EXTENDED: For extended recording quality
(Compression Rate 1/25)
The factory default setting is SUPER FINE,
4. Move the cursor to the PRE PICTURES parameter by
pressing the A or ▼ button, then select a number of
the pre-recording image by pressing the 0 or B but­
ton.
0: Disables pre-recording.
4 to maximum: Sets the number of images for pre­
recording.
• The maximum number of the pre-recording is deter­
mined by the setting of FIELD/FRAME and REC QUALI­
TY.
The factory default setting is 15.
5. Move the cursor to the POST PICTURES parameter by
pressing the A or T button, then select a number of
the post-recording image by pressing the 0 or Q but­
ton.
4 to 200: Sets the number of images for post-recording.
The factory default setting is 60.
6. Move the cursor to the DYNAMIC REC parameter by
pressing the A or ▼ button, then select the recording
pattern for post-recording by pressing the 0 or 0 but­
ton.
OFF: Records the images assigned to group inputs,
including the one that has activated the alarm (the
same as pre-recording).
ALM-ONLY: Records the particular image that has acti­
vated the alarm.
The factory default setting is OFF.
7. Press the SETUP/ESC button to return to the previous
program number menu.
3. Move the cursor to the REC QUALITY parameter by
pressing the A or T button, then select a recording
image quality by pressing the 0 or 0 button.
SUPER FINE: For enhanced sharpness (Compression
Rate 1/6)
49