Panasonic PANASYNC S50 - Manuel (Page 16)

( Power Management System)
This nrxjnitor meets VESA (Video Electronics Standards Association) DPMS (Display Power
Management Signaling) standards. In order for the monitor’s power saving feature to func­
tion, the video board or computer must also meet VESA» DPMS™ standards.
State Power LED Power Recovery time
On Green Normal Not Applicable
Standby Amber < 15 Watts < 3 seconds
Suspend Amber < 15 Watts < 3 seconds
Off Amber < 5 Wafts < 20 seconds
Note:* The Power Management System "Off" State is different from the "Off" stste of the
Power Switch. When The Power Switch is "Off" the Power LED is dark.
The monitor goes into various power saving stages depending on the incoming video
signal as shown in the following table.
State Horizontal Sync Vertical Sync
On Pulses Pulses
Standby No Pulses Pulses
Suspend Pulses No Pulses
Off No Pulses No Pulses
The monitor automatically goes through the PMS (Power Management System) states
when there are r« Horizontal and/or Vertical sync pulses. To release the nwnitor from a
PMS state, press any key on the computer keyboard.
NOTE:
Pressing the monitor Power Switch when the computer Is In the PMS state will not
recall the screen Image, you must touch any key on the keyboard or move the
mouse to restore the Horizontal and/or Vertical Sync output from the computer.
— 11 —