Rockwell Automation 1440-REX03-04RG XM-442 Voted EODS Relay Module - Manuel (Page 8)

8 Rockwell Automation Publication GMSI10-IN016C-EN-P - February 2014
XM-442 Voted EODS Relay Module
Reset Switch
The XM-442 module has an external reset switch on top of the module. The Reset switch can be used to reset all latched
relays.
Install the XM Serial Configuration Utility Software
The XM Documentation and Configuration Utility CD is packaged with the XM modules. It contains the XM Serial
Configuration Utility software, a set of user guides, hazardous location installation drawings, and electronic data sheet
(EDS) files that are used by network configuration tools such as RSNetWorx™ for DeviceNet software. The user guides are
in portable document format (PDF), and must be viewed with Adobe Acrobat Reader software.
To install the XM Serial Configuration Utility software, follow these steps.
1. Insert the XM Documentation and Configuration Utility CD-ROM into the CD-ROM drive.
2. Follow the instructions that appear to install the XM Serial Configuration Utility.
3. When you are finished installing the software, remove the XM Documentation and Configuration Utility
CD-ROM from the CD-ROM drive; store it in a safe place.
IMPORTANT ATTENTION: The Reset switch resets the relays only if the condition that caused the activation is no longer present:
• The Reset switch resets the shutdown relays only when the overspeed/circuit fault conditions exist on one or fewer
channels.
• The Reset switch resets the alarm relay only when no overspeed/circuit fault conditions exist on any of the channels.
If autorun is Then
Enabled The Setup program starts automatically and the XM Serial Configuration Utility opening screen appears.
Disabled Follow these steps.
1. Click Start, and then click Run.
The Run dialog box appears.
2. In the Open box, type x:\autorun, where x is the letter of the drive containing the XM Documentation and
Configuration Utility CD-ROM.
3. Click OK.
The XM Serial Configuration Utility opening screen appears.
VOTED EODS RELAY
1440-REX03-04RG
Reset Switch