Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 Installation Instructions - Manuel (Page 23)

FactoryTalk Historian Machine Edition Module 23
Publication 1756-IN106A-EN-P - March 2011
– The firmware version number, which is listed on the FactoryTalk
Historian ME Module’s home page.
IMPORTANT
Any kind of firmware upgrade or reinstall will clear out
all logs. A firmware upgrade will preseve archived data
and application configuration information, but a reinstall
will clear out all application configuration information
and archived data. If you want to save your settings,
therefore, download and back up your configuration and
logs. For more information, refer to the FactoryTalk
Historian ME user’s guide chapter on module
administration.
IMPORTANT
If you click [Restore Defaults] or [Reset Security] from
the Add on Profile (AOP), then the module goes into a
pending state. This pending state blocks you from
upgrading or reinstalling the firmware before one of the
following occurs: the five (5) minute window expires, the
module is physically reset in the chassis, or you
power-cycle the module. Therefore, you can only
upgrade or reinstall the firmware when the module is
not in a pending state. For more information about the
AOP, please see the associated documentation.