Dock Edge + Flexi-Flag Pole - Manuel

Kit Contains:
(1) 7' Pole Assembly
(3) 1/4" SS Lag Bolts
(3) SS Washers
(1) Mounting Base
(1) Thumb Screw
(2) SS Flag Clips
(2) Nylon Flag Swivels
(1) Instructions
6045, No Flag
6045A, American Flag
6045C, Canadian Flag
Dock Edge + Inc. PO Box 6,
River Drive Park, Ontario, Canada,
LOG 1SO
Office: Ph/FAX (416)853-1863
Plant: Ph (416)738-8884
FAX (416) 738-8295
Dock Edge + Inc. #6045, 6045A, 6045C
Flexi-Flag Pole
Assembly Instructions
Your Flexi-Flag Pole is
designed to flex in the
wind, unlike rigid steel
poles. The pole is
non conductive, but
any flag pole should
not be located where
it could come in contact
with Hydro Lines.
Fly your colors with pride
Wall Mounting At 45º
Rail / Flat Mounting 45º
The flag can be mounted either as a
wall mount or a flat base mount as
shown. If you have elected to mount
the flag as a wall mount unit, we
suggest that it be located so the
flag can easily be changed when
necessary. Under a window or
beside a door makes flag changing
easy.
Mount the base to the selected area
using the supplied Stainless Steel
lags and washers. Clip the flag into
the flag clips , insert the pole end
into the base. Thighten the thumb
screw. When the base is mounted as
a WALL MOUNT the hook can be
used for hanging flower baskets.
The Swivel System Designed Into This Product
Greatly Reduces Flag Tangles
SS Flag Clip
Nylon Swivel
Swivel Stop
Made In Canada
Flag Size
27" x 54" Grommet Mount
Dock Edge + Inc.
35 Armthorpe Road
Brampton, Ontario, Canada
L6T 5M4
www.dockedge.com
(800) 295-3625 Fax: 905-790-6777