NaceCare Solutions TTB1620T - Manuel (Page 27)

27
!
!
The floor-tool
Fig 35
Fig 37 Fig 38
Fig 36
To clean the floor-tool, remove securing-pin and pull-free from the holder (see Fig 35).
Rinse the floor-tool assembly with clean water and refit.
Periodically the floor-tool blades should be examined and checked for wear and damage.
The blade removal is easy. Simply start by removing the four retaining pins (Fig 36), turn the
floor-tool over and separate the blade carrier from the body (Fig 37).
Peel away the blades from their locating lugs (Fig 38) and examine or renew as required.
Replacement is a reversal of the removal process.
Floor-tool overview
1. Floor-tool main body
2. Rear blade
3. Blade carrier
4. Front blade (slotted)
5. Retaining pins x 4
1
2
3
4
5
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF PRIOR TO ANY
MAINTENANCE USING THE MASTER CONTROL ON/OFF KEY.
REMOVE THE KEY PRIOR TO ANY MAINTENCANCE OPERATION.
Changing the Floor Tool Blades