Napoleon Fireplaces NPI45 - Manuel (Page 12)

W415-0702 / B / 04.04.12
12
2.5 RATING PLATE INFORMATION
For rating plate location, see “INSTALLATION OVERVIEW” section.
This illustration is for reference only. Refer to the rating plate on the appliance for accurate information.
SAMPLE
- INSTALL AND USE ONLY IN ACCORDANCE WITH
THE MANUFACTURER’S INSTRUCTIONS AND
LOCAL BUILDING CODES. MINIMUM CEILING
HEIGHT: 7FT (2.13M) HEARTH EXTENSION /
COMBUSTIBLE FLOOR PROTECTION: IF
INSTALLED ON A COMBUSTIBLE FLOOR, UNIT
MUST BE PLACED ON A NON-COMBUSTIBLE
FLOOR PROTECTOR EXTENDING 6” IN FRONT.
- DO NOT CONNECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE.
- REPLACE GLASS WITH ONLY CERAMIC GLASS.
DANGER: RISK OF ELECTRICAL SHOCK.
DISCONNECT POWER BEFORE SERVICING
UNIT.
- KEEP VIEWING DOOR TIGHTLY CLOSED
DURING OPERATION.
- CONTACT LOCAL BUILDING AND FIRE
OFFICIALS ABOUT RESTRICTIONS AND
INSTALLATION INSPECTION IN YOUR LOCAL
AREA.
- SUITABLE FOR USE IN MOBILE HOMES WHEN
USED WITH OUTSIDE AIR INSTALLATION KIT.
- REFER TO INSTALLATION INSTRUCTIONS OR
LOCAL BUILDING CODES WHEN PASSING
EXHAUST SYSTEM THROUGH COMBUSTIBLE
WALL OR CEILING.
LISTED PELLET FUEL BURNING ROOM HEATER
TESTED TO: ASTM E 1509, UL1482, ULC S628
MODEL NPI45
CAUTION: HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.
U.S. ENVIROMENTAL PROTECTION AGENCY Certified to comply with July 1992 Particulate Emission Standards
WOLF STEEL LTD.
24 NAPOLEON ROAD. BARRIE, ONTARIO L4M 0G8 CANADA
NPI45
MINIMUM CLEARANCES TO COMBUSTIBLE
Sidewall A 8”
Mantel B 8”
Floor Protector C 6”
Recess Width D 31 1/2”
Recess Height E 26 1/2”
Recess Depth F 16”
Mantel Depth G 10”
INPUT RATING
MIN 1 LB/HR
MAX 5 LB/HR
ELECTRICAL RATING
120V 3.6A 60HZ
MASONRY FIREPLACE INSTALLATION
BUILT-IN FIREPLACE INSTALLATION
(FRONT VIEW)
BUILT-IN FIREPLACE INSTALLATION
(SIDE VIEW)
WOOD MANTEL
ENCLOSURE
INSERT
B
D
E
MANTEL
ENCLOSURE
MANTEL
INSERT
B
A
HEARTH EXTENSION
C
E
C
B
G
F
9700539 (WSL)
4001657 (NGZ)
4001658 (NAC)
4001659 (WUSA)
REFERENCE #
W/N 16064