Sony IPT-DS1 - Manuel (Page 47)

11-GB
Preparing the intelligent pantilter
Mounting the base
The base A is pre-mounted in the tilt arm of this unit. Make sure it is mounted
properly.
If the base is loose:
Mount the base in the right direction, as described below.
Multi connector Base name
Notes ¦
Hold the base so that the base name reads in the same direction as the Sony logo on
ˎ
the main unit, and mount it straight down onto the main unit.
Make sure that it is securely fitted all the way down.
ˎ
Do not touch the multi connector.
ˎ