Samlex America SSW-R1-12B - Manuel (Page 8)

8
4
OPERATION
5
SPECIFICATIONS
MODEL NO. SSW-R1-12B
APPLICABLE MODELS OF INVERTERS SSW-1000-12A, SSW-1500-12A, SSW-2000-12A
RECEPTACLE FOR CONNECTING CABLE
8P8C (8 Position, 8 Conductor)
Modular receptacle (rJ-45)
CONNECTING CABLE TyPE
8 Conductor,
Cat 5 networking Cable
CONNECTING CABLE TERMINALS
8P8C (8 Position, 8 Conductor) Modular Plug
(rJ-45)
TyPE OF CONNECTION Straight
CONNECTING CABLE, LENGTh 3 meters / 10'
General:
DIMENSIONS (WIThOUT CABLE), MM (L
x
W
x
h) 102 x 82 x 35
DIMENSIONS (WIThOUT CABLE), IN (L
x
W
x
h) 4.0 x 3.2 x 1.4
WEIGhT (WIThOUT CABLE), KG 0.056
WEIGhT (WIThOUT CABLE), LB 0.12
The remote Control is provided with 3 meter / 10 ft. length of Cat 5, Straight,
networking Cable with 8P8C (8 Position, 8 Conductor) Modular Plugs (rJ-45) on
either ends . Plug one end of the cable to the receptacle on the remote Control
(3). Locate the 8P8C (8 Position, 8 Conductor) Modular receptacle (rJ-45) on the
inverter and securely insert the other end of the plug on the remote Control cable.
for switching on and switching off the Inverter using this remote Control, the
Main on / off Switch on the Inverter should be in the off condition.
CAUTION! If the ON / OFF Switch on the Inverter is left in ON position, the Inverter
cannot be switched off using this Remote Control. The Remote Control will, however,
continue to display the status of operation.
Please see under “Section 3 - Display” for display information.
NOTE: Specifications are subject to change without notice.