Before first use, Control panel, 1 initial cleaning – Electrolux EOV5700AAX Manuel d'utilisation
Page 7: 2 setting and changing the time, Changing the time of day, 3 preheating, 1 electronic programmer

4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial cleaning
• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
4.2 Setting and changing the
time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few sec-
onds the display shows the software ver-
sion.
After the software version goes off, the
display shows h and 12:00 flashes.
Setting the time of day:
1.
Touch
or
to set the hours.
2.
Touch
.
3.
Touch
or
to set the minutes.
4.
Touch
or
.
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only
when the appliance is off. Touch
.
flashes in the display. To set the new time
of day, use the above procedure.
4.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function
and the maximum
temperature.
2.
Let the appliance operate for 45 mi-
nutes.
3.
Set the function
and the maximum
temperature.
4.
Let the appliance operate for 15 mi-
nutes.
Accessories can become hotter than usu-
ally. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
5. CONTROL PANEL
5.1 Electronic programmer
1
11
2 3 4
6
5
7 8 9 10
Use the sensor fields to operate the appli-
ance.
Sensor
Field
Function
Description
1
ON / OFF
To activate and deactivate the appliance.
ENGLISH
7