Electrolux EOV5700AAX - Manuel (Page 27)

12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not
heat up. The appliance is deacti-
vated. Activate the appliance.
The appliance does not
heat up. The clock is not set. Set the clock. Refer to
"Setting and changing the
time”.
The appliance does not
heat up. The necessary settings
are not set. Make sure that the set-
tings are correct.
The appliance does not
heat up. The automatic switch-off
is activated. Refer to „Automatic
switch-off“.
The appliance does not
heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact
a qualified electrician.
The lamp does not oper-
ate. The lamp is defective. Replace the lamp.
The display shows C3. You want to start the py-
rolytic cleaning but you
did not fully close the
door. Fully close the door.
The display shows F102. The door lock is defec-
tive. • Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
F102 again, contact
the Customer Care De-
partment.
The display shows an er-
ror code that is not in this
list. There is an electrical fault. • Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
The display does not
show the time during the
off status. The display is deactiva-
ted. Touch and at the
same time to activate the
display again.
ENGLISH 27