Doro NEOBIO 10 - Manuel (Page 5)

English

Battery LED
When the batteries are running low, will flash and a warning tone will be heard when a call is in
progress.
Please note that the complete battery indicator in the display will flash as long as the handset is charging, and
when the battery is fully charged only the inner segment will flash.
Base unit indicators
7
Steady light while charging is in progress and flashes when fully charged.
Only NeoBio 15r/25r:
Steady light during calls and flashes when there is an incoming call or new message on the answer
machine.
Range
�he telephone’s range depends on whether or not the radio waves carrying the call are restricted by
obstacles in their path, and is usually between 50 and 300 metres. Coverage can be improved by turning
one’s head so that the handset is aligned with the base unit. Sound quality declines as the limit is reached
until the call is finally interrupted.
�he
6
symbol is shown when the phone is within range and goes out/flashes when it is out of range.
Making a call
1. Enter the required number. Delete if necessary with right menu button
C
.
2. Press
q
to make the call. Press
L
to end the call.
Please note! (Only NeoBio 20/25r)
To switch between handset/speaker press . In speaker mode, you cannot both speak at once – you must
take it in turns to talk.
Receiving a call
1. Wait for the handset to ring. Wait for the handset to ring.
2. Press
q
to answer. Press
L
to end the call.
Volume control
�he volume may be adjusted during a call with
{
/
}
.
Redial
Press
r
. Scroll among the 5 most recently dialled numbers with
{
/
}
. Press
q
.
Mute button
�he microphone can be switched off/on during a call with
C
(right menu button).
Paging
�he handset will ring when
J
(on the base unit) is pressed. �he signal will stop automatically after a
while or if the
L
button on the handset or the
J
button on the base unit are pressed.