Danby Premiere DPAC 11010 - Manuel (Page 6)

ELECTRIC SHOCK HAZARD: To avoid
the possibility of personal injury, disconnect
power to the unit before installing or servicing.
Fig. 1
INSTALLATION ACCESSORIES (FIG. 1)
Flexible Exhaust Hose (13cm) & Exhaust nozzle
connector (2 pcs)... from 17
7 /
10
(45cm) up to 53 1 /
6
”(135cm)
Adjustable window door slider kit (3 pcs)..... from 28
1 /
3
”(72cm) up to 80” (203cm)
Fixture..... (2 pcs)
Screws...(8 pcs)
NOTE: The exhaust/window kit must be installed at all
times when the unit is operating under AIR
CONDITIONING mode.
INSTALLATION ACCESSORIES
Fig. 2
There should be at least 11.8” (30cm) clearance between the unit and any other objects or building structures,
and should be installed on a level surface. The unit does not have to be vented outside during Dehumidifying
or Fan Only mode operation.
Flexible Exhaust Hose
Exhaust Nozzle
Connector
Fixture
Screws
Adjustable Window Slider Kit:
28 1/3” (72cm)- 80” (203cm)
Back of
Window Panel
Tube Adapters
INSTRUCTIONS FOR ASSEMBLING THE WINDOW
ADAPTER KIT (FIG. 2).
a) Insert tube adapters through the back of the window panel.
b) Secure each tube adapter with four screws through the
front of the window panel.
c) Insert window panel extensions into the window panel.
Lightly tighten the screws in the window panel to hold the
extensions in place.
IMPORTANT
5
INSTALLATION
WARNING
1) Select a suitable location, making sure you
have access to an electrical outlet.
2) Install the flexible hose to the rear side of the
unit. Insert the hose collar on top of the exhaust
opening and twist to lock into position.
3) Install the adjustable Window Slider Kit as
required (see Fig. 3a & 3b).
4) Install the opposite end of the flexible exhaust
hose into the window exhaust adapter.
5) Install the window exhaust adapter into the
opening in the slider section, making sure the
window slider sections are secure.
6) Plug the unit into a 115V/60Hz grounded
electrical outlet.
WINDOW KIT
INSTALLATION
HORIZONTAL
Window Slider Kit:
Min.: 26
5 /
8
” (67.5cm)
Max.: 80” (203cm)
VERTICAL
Window Slider Kit:
Min.: 26
5 /
8
” (67.5cm)
Max.: 80” (203cm)
Fig. 3a
Fig. 3b
Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to
a maximum height of 80” (203cm).For vertical window applications, multi lock positions are
provided on the edge of each slider section to secure each sliding section together.