Laerdal SimJunior Advanced - Manuel (Page 14)

12
Note: For information on and spare parts, see section: Spare
Parts and Accessories.
Before Storage or Shipping
– Flush the IV arm with 60% Isopropanol alcohol or 70% ethanol.
Open the drain valve on the bottom of the Simulator’s right foot.
Maintenance
Maintenance after each Simulation Session
The following preventive measures are required to ensure longevity of
the SimJunior Simulator.
– Power off the SimPad, Link Box and PCs
– Charge batteries if necessary
– Flush the IV-arm system and drain the IO leg (leave the plug in the
bottom of the IO leg open)
– After each session where the IV-arm has been used, flush the IV
arm with 60% Isopropanol alcohol or 70% ethanol
– Wipe the skin with a moist cloth
– Remove wet clothes or linens
– Remove tape residue with a moist cloth or rubbing alcohol
– Based on the use of the Simulator, replace modules that are
consumed or damaged
– Replace cables or connectors showing visible damage
– Servicing should be performed by qualified personnel at regular
intervals
Always perform a service:
– If liquids have been spilled in or on the Simulator
– After use in dusty environments