Labconco Intelli-Sense Multi-Speed Blowers 7183413 - Manuel (Page 42)

Chapter 7: Modifying Your Blower
Product Service 1-800-522-7658 38
Original instructions
Flexible Duct Connections
This flexible connection reduces vibration between the blower and PVC ductwork.
It is supplied with two clamps for easy installation.
Nominal Diameter/Inches 9" for use with 8" fittings 11" for use with 10" fittings 13" for use with 12" fittings
Catalog Number 47265 70342 56214
Shipping Wt./lbs. 5 5 5
Blower Transition Adaptors
This epoxy-coated steel transition adaptor fits all Labconco Coated Steel Blowers.
This adaptor allows you to connect round thermoplastic duct to the exhaust side of
the blower to create an exhaust stack. Nominal size PVC duct fits inside the
adaptor opening.
Nominal Diameter/Inches 8 10 12
Catalog Number 47224 4722401 70034
Shipping Wt./lbs. 3 4 4
For use with Labconco Blowers 70680-
70687
70680-
70687
70688-
70697
Auxiliary-Air Transition Adaptor
The auxiliary-air transition adaptor is the same construction as the blower
transition adaptor, but is designed to allow you to connect round thermoplastic
duct to the regular auxiliary-air collar of Protector Fume Hoods.
Nominal Diameter/Inches 10
Catalog Number 48893
Shipping Wt./lbs. 4
T and Y Connections
PVC fittings shaped in T and Y configurations are compatible with thermoplastic
duct. End connections receive PVC pipe directly. Contact Labconco for help in
sizing blowers with these accessories.
Nominal Diameter/Inches 10x10x12
T’s
Catalog Number 56304
Shipping Wt./lbs. 20
Approx. Height/Inches 19
Nominal Diameter/Inches 10x10x12 12x12x16
Y’s
Catalog Number 56301 56305
Shipping Wt./lbs. 19 20
Approx. Height/Inches 12-3/4 23-1/4