Maytag W10176966C - Manuel (Page 5)

Parts supplied:
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washers (4)
D. Transport bolt hole plug (4)
E.
Beaded strap
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
Pedestal
A pedestal will add to the total height of the washer for a total height of 53.5" (1 359 mm).
This pedestal is available in several colors.
To order, call the dealer from whom you purchased your washer or refer to the "Assistance
or Service" section.
If You Have You Will Need to Buy
Laundry tub or standpipe
taller than 96" (2.4 m)
Sump pump system (if not already available)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall drain tub or
utility sink and sump pump (available from local plumbing
suppliers)
Floor drain Siphon break. Part Number 285834; additional drain hose
Part Number 831 81 55; and connector kit.
Part Number 285835
Drain hose too short 4 ft (1.2 m) drain hose extension kit. Part Number 285863
Water faucets beyond reach
of fill hoses 2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Pedestal Height Color Part Number
10" (2.54 mm) White MHP1000SQ
10" (254 mm) Black MHP1000SB
15.5" (394 mm) White XHP1550VW
15.5" (394 mm) Black XHP1550VB
15.5" (394 mm) Slate XHP1550VE
15.5" (394 mm) Crimson Red XHP1550VF
15.5" (394 mm) Oxide XHP1550VJ
15.5" (394 mm) Evergreen XHP1550VP
Stack Kit
Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase
a Stack Kit.
To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or
Service" section. Ask for Part Number 8212640.