Phil & teds, 280-c, 280 nest assembly – phil&teds nest Manuel d'utilisation
Page 5
NEST
Instructions / Gebrauchsanweisung / Instrucciones / Instructies
9
NEST
Instructions / Gebrauchsanweisung / Instrucciones / Instructies
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
Always check that the base wire inside
fabric is clipped properly in place before
use.
Avant toute utilisation, vérifiez que la
cordelette élastique de la base est
correctement accrochée.
Überprüfen Sie sorgfältig, dass der
Boden Bügel vor dem Gebrauch richtig
positioniert ist.
Siempre revise que el cable de la base
este sujeto en la posición correcta antes
de su uso.
Zorg er voor dat de bodem beugel altijd
juist is bevestigd voor gebruik.
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-