Panasonic WV-BPR554 - Manuel (Page 36)

9. Special Menu (SPECIAL)
This menu lets you adjust and setup the video signal of
the camera to meet your requirements.
Move the cursor to RET on the bottom line of the CAM
SET UP menu and press d or simultaneously for
2 seconds or longer. The SPECIAL menu appears on
the monitor as shown below.
9-2. Aperture Gain Setting (AP GAIN)
1. Move the cursor to the AP GAIN parameter.
2. While observing the vector scope or video monitor,
move the "I" cursor to adjust the aperture gain
level.
9-3. Pedestal Level Setting (PEDESTAL)
1. Move the cursor to the PEDESTAL parameter.
2. While observing the wave form monitor/oscillo-
scope or video monitor, move the "I" cursor to
adjust the pedestal level (black level).
To reset to the factory settings
1. Move the cursor to the CAMERA RESET parame­
ter. The words PUSH SW start blinking.
2. While holding down d and , press El for 2
seconds or longer. The camera is reset to the fac­
tory settings.
9-1. Camera Picture Upside Down Positioning
(UP SIDE DOWN)
1. Move the cursor to the UP SIDE DOWN parameter.
2. Select ON when you want to turn the picture
upside down.
To close the SPECIAL menu and return to the CAM
SET UP menu
Move the cursor to RET and press C°].
To close the SPECIAL menu and return to the cam­
era picture
Move the cursor to END and press El ■
-34-