Panasonic WV-BPR554 - Manuel (Page 26)

2. Move the pointer to the character to be edited by
pressing ^ or . Then move the cursor to the
character area and select a new character.
3. Press [°l to determine the CAMERA ID,
To erase all characters in the editing area
Move the cursor to RESET and press t°] - All charac­
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSI, and press . The dis­
play shown below appears and the CAMERA ID
starts blinking.
Blinking
2. Move the CAMERA ID to the desired position by
pressing
3. Press CEI to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of
is kept pressed for a second or
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press E3 ■ The CAM SET
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the light control mode according to the
lens type.
ALC: If you use the auto iris lens, select this parameter.
ELC: If you use a fixed or manual iris lens, select this
parameter.
** CAM SET UP **
CAMERA ID OFF "1
ALC/ELC
SHUTTER
ACC ON
SENS UP OFF
STHC INT
MOTION DET. OFF
LENS DRIVE DC
1, Move the cursor to the ALC/ELC parameter.
2. Select ALC or ELC,
-24-