Camera setup, To edit the camera id, To enter a blank space in the camera id – Panasonic WV-BPR554 Manuel d'utilisation
Page 25: To edit a specific character in the camera id
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
• CAMERA Setup
Move the cursor to CAMERA of the SET UP menu and
press [U.
The CAM SET UP menu appears on the monitor
screen.'
1. Camera Identification (CAMERA ID)
Setting
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists
of up to'16 alphanumeric characters. You can select
whether to have the camera ID displayed on the moni
tor screen or not.
Character Cursor
** CAM SET UP **
CAMERA ID
iCWTEi
"X
ALC/ELC
AliC
"X
SHUTTER
—
AGC
ON
SENS UP
OFF
SYNC
INT
MOTION DET
OFF
LENS DRIVE
DC
To edit the CAMERA ID
1.. Move the cursor to the CAMERA ID parameter.
2. Press El ■ The CAMERA ID menu appears. The
cursor on the letter “0” starts blinking.
Pointer---------1
-01234
L23456789
ABCDEFGBIJKLH
NOPQRSTOVWXYZ
<)*,'"i;&#!?=
+-*/%$
SPACE
POSI RET END RESET
Character
Area
Command
Editing
Area
CAMERA iD menu
3. Move the cursor to the character you want to
change by pressing C
)
/
.
4. After selecting the character, press [=]. The
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
5. Repeat the steps above until all characters are
edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press tH ■
To edit a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
-23-