Panasonic KC-TCC942-B - Manuel (Page 71)

Problem Remedy
You cannot store a phone
number in memory.
• 1 SEARCH) (v or a ) mav have been
pressed when you picked up the
handset. Press lEXlTl. then trv aaain.
• You cannot store a number while the
unit is in the talk, speakerphone or
intercom mode.
• Do not pause for over 30 seconds
while storing.
While programming or
searching, the unit starts to
ring and stops the
program/search.
• To answer the call, press [TALKl
orlDIGITALSP-PHONEl.
Start from the beginning after hanging
up.
The unit does not display the
name and/or phone number
of callers.
• Other telephone equipment may be
interfering with your phone.
Disconnect them and try again.
• Other electrical appliances connected
to the same outlet as the phone may
be interfering with the Caller ID
information. Telephone line noise may
be affecting the Caller ID information.
The handset display becomes
blank while searching.
• Do not pause for over 60 seconds
while searching.
! LOCATOR/iNTERCOM 1 does
not function.
• The handset is too far from the base
unit.
• The handset is engaged in an outside
call or in the search mode. Wait until
the IN USE/CHARGE indicator light
goes out.
[REDIAUPAUSEl does not
function properly.
• The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a cal! (p. 28). If another
number has been dialed first, it will
operate as a pause button {p. 49).
71