What the confirmation tone means, Selecting the dialing mode – Panasonic KC-TCC942-B Manuel d'utilisation
Page 17
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
You can program the dialing mode
using the handset close to the base
unit.
If you have touch tone service, set to TONE. If rotary pulse service is
used, set to PULSE. The factory preset is TONE.
The TALK/BATT LOW and DIGITAL SP-PHONE indicator lights must
be off before programming.
Selecting the Dialing Mode
1
Press
[PROGRAM].
• The TALK/BATT LOW indicator
flashes.
SAVE AUTO# ?
v=NEXT
a
=YES
Press I
SEARCH
I
V (NEXT
key) twice until
“SET DIAL MODE
?” is displayed.
SET DIAL MODE ?
v=NEXT
a
^YES
Press
[SEARCH]
A (YES
key).
DIAL MODE
V=TONE
a
=PULSE
To select PULSE, press I
SEARCH
I
a
.
OR
To select TONE, press
[SEARCH]
v.
• A confirmation tone sounds.*
• The selected mode is displayed.
• tn a few seconds, the handset will
return to the stand-by mode.
DIAL MODE
PULSE
DIAL MODE
TONE
To cancel, press I
EXIT]
or
[PROGRAM],
then start from step 1.
If the display shows
“
save
error
”,
move closer to the base unit and try
again. If
“
save
error
”
is still displayed, place the handset on the base
unit. Restart from step 1.
*What the confirmation tone means
1 beep:
The mode is different from a previously selected one.
2 beeps: The mode is the same as a previously selected one.
/7