Close the paper feed conveyor – Panasonic HIGH SPEED KV-S6045W Manuel d'utilisation
Page 41
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Replacing Consumable Roller Modules
S
Tilt the paper feed conveyor at a
slight angle pointing downward
and attach it as shown in the
diagram to the right.
9
10
Close the paper feed conveyor.
• Push up the paper feed conveyor until
it clicks into place.
• You are now finished attaching the
paper
feed
roller
module
and
separation roller module.
To continue, replace the retard roller
module according to the following
procedure. (The retard roller module
is located in the conveyor.)
Using
your
fingers,
hold
the
conveyor and pull it towards you
to open it.
• When the conveyor is pulled towards
you, the click-stop mechanism will be
released.
Retard roller module
Document guide
Conveyor
41