Re-attachment of the white sensor roller, Lower white sensor roller – Panasonic HIGH SPEED KV-S6045W Manuel d'utilisation
Page 36
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Cleaning the Unit
6
Close the front door.
•
Push both sides of the front door
down gently until it clicks into place.
• Do not close the front door holding
the hopper extension tray.
7
Close the ADF door.
•
Push both sides of the ADF door
down gently until it clicks into place.
•
If the ADF door proves difficult to
close, push its left side down with a
little more force.
• After cleaning, clear the "Clean Roller
Warning" display.
(See page 18.)
Re-attachment of the white sensor roller
When the white sensor roller is removed while cleaning the inside of the scanner, re
attach it as shown below.
Lower white sensor roller:
Attach the roller by placing the gear
side to the left side of the scanner
and
inserting
both
side's
bearings
into the guide grooves.
• Match the flat side of the bearing with
the flat side of the guide groove.
•
After attaching, press down on top of
the white sensor roller with your finger
to confirm if it moves or not.
Flat side
Bearing
the bearing^
White sensor roller
Guide groove
Please attach the right side bearing in the same way.
36