Panasonic DVD-LV70 - Manuel (Page 38)

Speaker settings
DVD-LV75
vjiumuA
Turn on this unit and the equipment you have connected.
M While stopped
1
Press [ACTION] or [MENU] to show the initial settings screen.
2
Use the cursor jockey [ A , ▼] to select *‘7 Speaker Setting” and press
[ENTER].
Use the cursor jockey [A, ▼] to select an item and press [ENTER].
•Multi-channel
When you have connected 3 or more speakers.
•2-channel
When you have connected 2 speakers or a
Dolby Pro Logic amplifier.
The initial settings screen is restored if you se­
lect “2-channei”.
When you select “Multi-channel”
The screen shown below appears.
Use the following procedure to adjust the settings for O, © and Q.
1. Use the cursor jockey [ A , T , ◄, ►] to select the item and press (ENTER],
2. Use the cursor jockey [▲, T ] to change the setting and press [ENTER].
3. Select "Exit” and press [ENTER],
Press [RETURN] to complete the settings.
■ To return to the previous menu
Press [RETURN].
■^■Note
oc
• If you have used an optical fiber cable to connect this unit
digitally to another unit, make the settings on the other unit.
•The setting is shown on the unit’s display when a multi-chan­
nel disc is being played right).
When set to “Multi-channel’
/ Ml MIX
V-............. -
When set to “2-channeI”
O Center
O Front (L)
Exit
Test signal
O Surround (L)
O Surround (L)
O Center
laim m mUli
o Presa F rrur : jìì
10T5897
O Surround
Speaker settings screen for Multi-channel
'O Center
O Front (R)
O Subwoofer
Q Subwoofer
O Surround (R)
O Surround (R)