Enjoying more powerful sound, 1 connect the equipment – Panasonic DVD-LV70 Manuel d'utilisation
Page 36
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Enjoying more powerful sound
Connection to a 2-channel amplifier or mini-system
(Analogue connection)
This figure shows DVD-LV75.
(DVD-LV70 and DVD-LV55 have only one AUDIO terminal.)
1
Connect the equipment.
Audio input terminal
2-channel analogue amplifier or mini-system
(Inciuding amplifier with Dolby Pro Logic)
DVD-LV75
Select “2-channel” in “7 Speaker Setting” page 38).
■ To enjoy Dolby Pro Logic {-* page 46)
As well as the connections shown above, you will need to connect center and sur
round speakers. See the operating instructions for the other equipment for connection
procedures.
•Turn V.S.S. off. Surround effects will not work correctly if V.S.S. is on.
■ When recording audio
You can connect recording equipment either through an amplifier or directly to this unit.
When connecting directly, use the same method used for connecting a 2-channel amplifier
or mini-system page 36, 37).
<Analogue recording>
You can record to a cassette or MD deck without sound being affected by copy guard if you
use analogue connection.
•Use a stereo connection cable for analogue connection.
DVD-LV75
When making analogue recordings, change the setting in “7 Speaker Setting” page 38,
“Speaker settings") to “2-channe!” even if you have connected 3 or more speakers to an am
plifier. This will ensure that you record the full soundtrack instead of just the 2 front speaker
channels.
10T5897