Press [play mode] to select program or random play, When play finishes, To restore normal play – Panasonic DVD-LV70 Manuel d'utilisation
Page 16: A program play, 1 press [enter, 3 press, To change the program i, To clear tracks from the program, To erase the whole program, Random play
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Other play modes
VCD
I
CD
While stopped
Press [PLAY MODE] to select pro
gram or random play.
If “0" appears on the LCD, press [■] to
clear on the unit’s display, then press
[PLAY MODE],
The mode changes each time you press
the button.
El
To play a maximum of 32 tracks in a
programmed order (Program play)
Choose a track, then press ENTER.
' C
Clear
Clear all
■rotal time
Press PLAY to start
I
m To play tracks randomly
(Random play)
I
— Normal piay mode
Select the screen for the mode then follow
the procedures in the next column to start
play.
■ When play finishes
The disc stops and the screen correspond
ing to the play mode reappears.
■ To restore normal play
While stopped
1. Press [■] to clear on the unit’s
display.
2. Press [PLAY MODE] to select normal
play.
3. Press [►].
A
Program play
1
Press [ENTER].
2
Use the cursor jockey
[ A ,
▼] to
select
a
track
and
press
[ENTER].
Each time you use the cursor jockey
[ A . Y ] ,
1^2^---------------- ^All
t_______________ t
Repeat steps 1 and 2 to program other
tracks.
•Instead of perfornning steps 1 and 2
above, you can also use the numeric but
tons to highlight a track.
•‘Total time” tells you the total time of the
programmed tracks.
•After you select “AN", you can then clear
unneeded tracks (see below),
3
Press [►].
•The contents of the program are saved in
memory until the unit is turned off or the disc lid
is opened.
[
To change the program
I
While stopped
1. Press [■] to re
turn to the pro
gram screen.
Choose a track, then press ENTER.
TfW*
rung
Clear
1
702__ J
2
3
Clear all
A
B
B
Total'time
7
a
7:12
Press PLAY to start
2. Use the cursor jockey [▲, ▼] to highlight
the track and repeat “Program play” steps 1
and 2.
•To clear tracks from the program
1. Use the cursor jockey [A, ▼,
►] to high
light the track.
2. Press (CANCEL).
• Instead of pressing [CANCEL], you can se
lect “Clear” and press [ENTER].
•To erase the whole program
Use the cursor jockey
[ A , ▼ , - A ,
►] to highlight
“Clear air and press [ENTER],
Random play
nOT5897
Press [►].