How to supply electricity, How to use as a steam iron – Panasonic NI-L70SR Manuel d'utilisation
Page 7
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
NOTE:
Most tap water can be used in this iron. If water is very hard, distilled or demineralized
water should be used. Do not use water processed through home water softening
systems because this water contains minerals that may be harmful to the iron. Do
not use water additives or substitute water such as linen or scented water in the
steam iron. They can stain fabrics or damage the iron.
HOW TO SUPPLY ELECTRICITY
The iron must be set securely on the Power Base in order to supply electricity. Electricity will
only be provided while the iron is placed on the Power Base. If you desire to set the iron down
while moving a garment on your ironing board, the iron must only be placed on the Power
Base. The Power Base will keep the temperature of the iron at the selected level.
HOWTO CONTROL TEMPERATURE
How to operate the Temperature Control PadC'SET " Pad)
NOTE:
All the lights will turn off once the iron leaves the Power Base. They will turn on again
when the iron is re-placed.
HOW TO USE AS A STEAM IRON
1. Fill iron with water. See section ” HOW TO FILL WITH WATER ".
2. Plug the cord into a standard 120V- 60Hz electrical outlet.
3. Set the iron on the Power Base securely. The green “ OFF " light will turn on.
NOTE;
If the green light does not turn on. replace the iron on the Power Base
again, otherwise the Temperature Control Pad cannot function.
4. Push the " SET " Pad to the corresponding temperature level. The red light starts blinking.
-7-