Connections, Connection with the camera site, Connection with the vcr – Panasonic WV-CM2080 Manuel d'utilisation
Page 6: Monitoring the playback picture, Monitoring the playback audio
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
CONNECTIONS
The connections described below should be made by qualified service personnel or system installers.
Shown below is an example of a basic system connection.
VCR
O
□□
■ Connection with the Camera
Site
Connect the Video Output of the camera site equipment to
the VIDEO IN connectors on the rear of the monitor using
coaxial cables.
The maximum coaxial cable lengths between the cameras
are shown below.
Cable
RG-59U
RG-6/U
RG-11/U
RG-15/U
3C-2V
5C-2V
7C-2V
10C-2V
Recommended
250 m
500 m
600 m
800 m
cable length
(825 ft)
(1 650 ft)
(1 980 ft)
(2 640 ft)
Connection with the VCR
Recording on the VCR
Connect the VIDEO OUT A or B connector on the moni
tor to the video input of the VCR with a coaxial cable.
Connect the AUDIO OUT A or B connectors on the
monitor to the audio input of the VCR with an audio
cable, if applicable.
Monitoring the Playback picture
Connect the video output of the VCR to the VIDEO IN A
or B connector on the monitor with a coaxial cable.
Monitoring the Playback audio
Connect the audio output of the VCR to the AUDIO IN A
or B connector on the monitor with an audio cable.