Adjusting the volume level, Fader adjustment interlock setting, Pre-out (external output) setting – Panasonic CQ-MRX777EUC Manuel d'utilisation
Page 38
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Pre-out (External Output) Setting
(Continued)
Adjusting the volume level
© Press SPC(SUB’W) in the PREOUT THRU mode to change to
LEVEL SELECT mode. (See page 35.)
® Press TRACKS*- or TRACK’*^ to increase or decrease the vol
ume.
^dB, -10dB<-0dB-^-i-10dB
-oo dB : No output (no sound) from the amplifier connected to Pre-
out
Press > or < when using a remote control.
Fader Adjustment Interlock
Setting
Depending on the position where the system-up speaker is connect
ed, either the front or rear can be selected to interlock with the volume
balance of the built-in amplifier.
(Default: FRONT)
© Press SPC(SUB-W) in the PREOUT THRU mode to change to F/R
SELECT mode. (See page 35.)
® Press TRACKS»- or TRACK'*^ to switch as follows.
FRONT : Interlock with the front
REAR
Interlock with the rear
‘Z- Press > or < when using a remote control.
36
CQ-MRX777EUC