Swiss+Tech BodyGard XL7 - Manuel

1
2
3
4
5
6
7
Flashlight
On/Off
Tire Pressure Gauge
On/Off (A)
Quick Release
Mechanism
Three LR44, AG13
or Equivalent Batteries
Captive
Screw
4. LED FLASHLIGHT
• Locate the button with the “lamp symbol”
on the front of your BodyGard ® XL7 emergency tool.
• Press 1 time to turn on flashlight.
• Press again 2 times to turn off.
5. RED DISTRESS FLASHER
• Locate the button with the “lamp symbol” on the
front of your BodyGard ® XL7 emergency tool.
• Press 2 times to activate the red distress flasher.
• Press again to turn off.
US Patents 7,557,720 and D575,182. Made in
China. BODYGARD ® is a registered trademark and
MMMMMMMMI ™ and MI ™ are trademarks of
Swiss+Tech Products. Specifications are subject
to change without notice.
©2013 Swiss+Tech Products, Solon, OH 44139 USA
BodyGard ® XL7
7-in-1 Automobile
Emergency Tool
Limited LIFETIME Warranty
This product is covered by a Limited Lifetime Warranty to
the original purchaser in that this product is free from
defects in workmanship and materials. During the
warranty period, this product will either be repaired or
replaced with a product of equal or greater value,
excluding any custom engraving or printing.
Damage through normal wear and tear (including
battery expiration and surface coatings), repair or
alteration, misuse, abuse, neglect, accident, improper
storage and handling, fire, negligence, improper
cleaning, circumstances not directly attributable to
manufacturing defects, or act of God is not included.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. Simply return your SWISS+TECH ® brand product
postpaid and insured to:
Swiss+Tech Products
30725 Solon Industrial Pkwy
Solon, OH 44139 USA
• Pull the BodyGard ® XL7 emergency tool away
from the key ring.
• Press barrel firmly against vehicle side window.
• Breaker point automatically deploys to break glass.
• Push out any remaining broken glass to escape.
IMPORTANT: Intended only to break tempered auto-
mobile door window glass during a vehicular accident.
Unit will not break windshields or other windows made
of laminated glass. Use in an emergency only.
DO NOT use for any other purpose. This is not a toy.
Testing of this feature may be performed using a thick
pad of paper or magazine. Place pad of paper on flat
surface, press glass breaking plunger against paper
and push down until steel pin is engaged. A small
indentation will be visible in the paper surface.
Variations in environmental conditions and types of
glass may result in damage to glass breaking pin when
used in an actual emergency. If the glass breaking
feature is used in an actual emergency, please purchase
a replacement BodyGard
® XL7.
Replacing the Batteries
• Using a small Phillips screwdriver, loosen the captive
screw (screw stays in battery cover) on the back of
your BodyGard
® XL7 emergency tool.
• Open the battery compartment.
• Remove the old batteries and replace with three new
LR44, AG13 or equivalent batteries, positive sides (+)
toward the Glass Breaker.
• Replace the battery cover and tighten the screw
gently. Be sure not to over tighten.
BEFORE USING, PULL TAB
TO ACTIVATE BATTERY.
Firmly grasp Pull Tab extending out of the Battery
Door and pull completely out of unit. Your
BodyGard ® XL7 emergency tool is now operational.
Built-in QUICK RELEASE for
immediate emergency use.
With key ring attached, grasp the emergency tool firmly,
and with a sharp tug, pull it away from Key Ring.
Optional Visor Clip
• Available online at
www.swisstechtools.com
• Replaces standard blade cover
• When clip is attached to front
of visor, tool must be removed
by pushing towards windshield
1. AUTOMATIC GLASS BREAKER
6" x 9" trim
folds to 2" x 3"
ENGLISH SIDE
• Pull the BodyGard ® XL7 emergency tool away from
the key ring. This exposes safety blade chamber.
• Place and hold outer edge of seat belt strap inside
blade chamber.
• Grasping the tool firmly, pull blade quickly
across strap to cut completely.
NOTE: Intended only to cut seat belt webbing if a seat
belt does not unlatch during a vehicular accident. Safety
blade designed to prevent accidental or unintentional
cutting. Blade type permitted on aircraft (carry-on and
checked) per USDHS, TSA Rev. 12-1-2005.
2. SEAT BELT CUTTER
• Press Tire Pressure Gauge button (A) to activate.
“0.0 PSI” will appear on LCD readout (default unit of
measure is PSI).
• Pressing the button again will change the unit of
measure from PSI to BAR (digital readout will show
“0.00 BAR”).
• Push Tire Gauge Nozzle onto tire valve. Be sure to
make a good seal between the nozzle and the valve
stem so no hissing sound of escaping air is heard.
• Hold Gauge on valve stem for about 3 seconds until
the pressure reading displayed is stable.
• To turn off, press and hold button for 3 seconds, or
wait 10 seconds for automatic shutoff.
3. TIRE PRESSURE GAUGE 6. SONIC ALARM
TO TURN OFF SONIC ALARM –
HOLD BUTTON FOR 2 SECONDS
• Locate the button with the “alarm” symbol on the
front of your BodyGard ® XL7 emergency tool.
• Press once to activate alarm.
• Press again and hold for 2 seconds to turn off.
CAUTION: Device emits loud noise to aid in warding
off attack. DO NOT place near ears.
NOTE: Be sure speaker on back is not obstructed.
• Remove the Tread Depth Indicator/Blade Cover/
Quick Release from your BodyGard ® XL7 tool.
• Insert the colored tip into the deepest tread on your
tire and see what color is visible.
• Repeat at various locations on both inner and outer
grooves and at
additional locations
around the
circumference of
the tire. This will
tell you if the tire is
wearing unevenly.
• GREEN means the
tread depth is fine.
• YELLOW means
you will need new
tires soon.
• RED means you
need new tires.
NOTE: Incorrect air pressure, poor wheel alignment,
worn parts, etc., can cause rapid or uneven tire wear.
Check for wear patterns often to detect problems
before excessive or irregular tread wear ruins the tire.
Green
Yellow
Red
7. TIRE TREAD DEPTH INDICATOR
Press
Once for
Flashlight,
Twice for
Flasher
Tire Gauge
Nozzle
Do Not
Obstruct
Speaker
This product contains button batteries.
IF SWALLOWED, batteries could cause
severe injury or death in just 2 hours.
SEEK MEDICAL ATTENTION IMMEDIATELY.
• Always purchase the correct size and grade
of battery most suitable for the intended use.
• Clean the battery contacts and also those
of the device prior to battery installation.
• Ensure the batteries are installed
correctly with regard to polarity (+ and -).
• Remove batteries if they are spent or if
product is unused for long periods of time.
• Always replace the whole set of batteries
at one time. DO NOT mix old and new.
• DO NOT MIX batteries of different types,
such as Alkaline, Standard (carbon-zinc)
and/or Rechargeable (nickel-cadmium).
BATTERY WARNINGS:
ST74123 Rev 2
swisstechtools.com
1-800-414-8799