Aquascape AquaJet 1000-1500 (99738, 99739 & 99740) - Manuel (Page 2)

1) electrical Safety Aquascape ™ AquaJet Pump
• Inspect your Aquascape ™ AquaJet ™ Pump upon arrival for any obvious signs of damage.
If damage is found, return the unit to where it was purchased for an exchange.
• Always unplug the Aquascape ™ AquaJet ™ Pump electrical supply before any
routine maintenance.
• Do not operate Aquascape ™ AquaForce ™ Pump with a damaged cord or plug
• Any pond related electrical equipment requires a GFI protected circuit. Always have a
qualified electrician install any electrical outlets. Test your GFI outlet on a regular basis.
• Do not use cord to pull plug from outlet. Grasp the plug and pull to disconnect.
• The Aquascape
™ AquaJet ™ Pump comes equipped with a 25’ power cord. This should
be enough to reach an outlet close to your pond. Do not splice or remove the pump cord
as this will void any warranty.
• The Aquascape ™ AquaJet ™ Pump has been designed to operate submersed in pond water.
DO NOT OPERATE DRY!
• KEEP THIS MANUAL–DO NOT THROW AWAY!
2
AquaJet
™
Installation & Maintenance Instructions
Fountain Pump
Contents:
(1) 2-1 Fountain Head Assembly
(AquaJet 1000 and 1500 only)
(1) Double Daisy Fountain Head
(AquaJet 600 only)
(1) Water Bell Fountain Head (AquaJet 600 only)
(1) Divert Valve
(1) Ring Nut (AquaJet 1000 and 1500 only)
(1) Upper Shell
(1) Lower Shell
(1) Pump
replacement Parts Item#
600GPH Impeller 98526
1000GPH Impeller 98527
1500GPH Impeller 98528