Aquascape Ultra Pump Fountain Head Kit (91045 & 91046) Manuel d'utilisation
Fountain head kit, Fo un tai n hea d kit

ULTRA
™
PUMP FOUNTAIN HEAD KIT SPECS
Pump Sizes
Fountain Head
Kit Needed
Waterbell
Spray Diameter
Foaming Jet
Spray Height
Daisy
Spray Height
Ultra
™
400
91045
up to 12”
up to 12”
up to 40”
Ultra
™
550
91045
up to 15”
up to 16”
up to 47”
Ultra
™
800
91045
up to 21”
up to 18”
up to 52”
Ultra
™
1100
91046
up to 31”
up to 20”
up to 76”
Ultra
™
1500
91046
up to 34”
up to 22”
up to 86”
Ultra
™
2000
91046
up to 36”
up to 24”
up to 96”
1 y
ear
w
arr
an
ty
g
ar
an
tie
d
e u
n a
n
1
1
ye
ar
warran
ty
g
ar
an
tie de u
n
a
n
1
For more information about our company or products,
please visit our website at www.aquascapeinc.com
or call us at (US) 1-866-877-6637 (CAN) 1-866-766-3426
©2012 Aquascape, Inc.
•
All Worldwide Rights Reserved
91058.122011
Safety information
WARNING: To provide continued protection against risk
of electric shock, be sure the fountain pump is connected to
a properly grounded, ground fault circuit interrupter (GFCI)
outlet. Always follow the safety instructions for the pump you
will be using.
aSSembling the ultra
™
pump with fountain
head fittingS
• Unpack the Diverter Valve and
thread it clockwise directly into
the pump discharge opening.
Do not use tools or over
tighten.
• The Diverter Valve has two
flow-control valves:
1) The accessory diverter
valve controls water flow
to any additional filters,
fountains or waterfalls
2) Side valve controls
water flow to attached
fountain head
• The side valve controls the fountain height, but the
accessory valve will also have an effect on the fountain’s
height. As more accessory flow is desired the amount of
water flowing to the fountain will diminish. Closing the
accessory valve will maximize flow to the fountain head.
• Thread the Riser Stem Base onto discharge. Riser stems
can be added to the base stem as-desired to increase
the fountain height to the best level for
your water feature and to compensate
for different pond depths.
Insert additional Riser Stems
and lock into position
Thread Riser Stem Base
onto discharge
• Install any one of the three fountain heads onto the top riser by simply
pressing it over the end of the riser. It is held in place by friction.
• The Ultra
™
Pump/Fountain Kit is designed to be submerged directly
into the pond or decorative fountain container. If using the Diverter
Valve to supply a pond filter, locate the pump as far as possible from
the location of the water entering back into the water feature, in order
to maximize pond circulation.
uSing diverter to operate
additional acceSSorieS
• Attach tubing to the
Diverter Fitting. If tubing
is loose on fitting, use
a hose clamp (not
included) to secure.
• Connect the other end
of the Pump tubing to the
pond filter, pressurized
filter, waterfall spillway,
or to a decorative
fountain or spitter.
• Connect the Ultra
™
Pump to an outlet that is
protected by a ground
fault interrupter (GFCI).
Once the pump is
running and water is
circulating through the
filter(s) or waterfall, check
for any fitting or waterfall
leaks where the external
connections are made.
operation and maintenance
• The height of the fountain is determined by several factors:
– Pump size, as estimated in the earlier table
– How deep the pump is positioned in the water; lowering the
pump increases the flow since the discharge is also lowered
– The two valve adjustments on the diverter valve
(see information above)
• To maintain the correct flow and fountain head patterns,
both the fountain heads and the pump screens will require
occasional cleaning.
troubleShooting
• Reduced Water Flow
– The fountain head itself
may be clogged. Shut off
the pump, and remove
the head for a more
thorough cleaning with a
garden hose and brush.
– The fountain heads can
be thoroughly cleaned, if
needed, by taking them
apart as shown here:
• Pump or plumbing may be clogged
– Clean the pump cage screens, filter sponges and/or impeller.
– Adjust the diverter valve(s) to set the desired flow to the fountain
and/or accessory.
The Aquascape Fountain Head Kit is ideal to add the beauty and
sounds of a fountain to your water feature while retaining the ability
to divert water flow to an additional accessor
y such as a decorative
spitter or a pond filter. The included diver
ter valve allows for the
adjustment of both the flow to the fountain head attachment and the
diverted flow to an accessor
y. Fountain heads are also an excellent
way to help oxygenate your pond to ensure that the pond’s ecosystem
is healthy.
Contents & PumP P
arts:
(1) Diver
ter Valve Assembly
(4) Fountain riser stems
(1) Foaming Jet Fountain Head
(1) W
aterbell Fountain Head
(1) Daisy Fountain Head
introduction
Riser Stem
Foaming Jet Head
Daisy Head
Waterbell Head
Diverter
Valve
VISIT
OUR
WeBSIT
e
DOW
nlOAD
A
FRee
COPy
OF
OUR CA
TAl
OG
thank you for choosing the
aquascape
ultra
™
pump
fountain
head Kit.
At Aquascape our goal is to provide our customers with the
best valued products in water gardening. We hope you enjoy your
purchase and thank you for choosing Aquascape.
Your Paradise. Our Passion.
®
1 year
warranty
The Aquascape Fountain Head Kit is guaranteed for
one year from date of purchase. Proof of purchase
required. Warranty does not cover damage
resulting from negligent handling, misuse or lack
of reasonable maintenance for care. Warranty is
valid against defects due to material and the company’s
workmanship only
. The
sole obligation
shall be
to replace
the defective
unit with a suitable replacement unit. Units should be checked for
proper operation prior to returning as defective.
no liability for loss
or damage of any nature or kind, whether arising out of or from the
use of the product, whether defective or not defective, is assumed by
Aquascape, Inc. or its affiliates.
☎
cont
act uS
For more information about our company or products
please visit our website at www.aquascapeinc.com or
call (US) 1-866-877-6637 (CAn
) 1-866-766-3426.
ULT
RA
™
PUM
P
Fo
Un
TAi
n HEA
D KiT
i n s T R U c T i o n s & M A i n T E n A n c E
ULTRA
™
PUMP
FoUnTAin
HEAD KiT
add the beauty
and Sound of a
fountain to your
water feature
Pump sold separately.