NaceCare Solutions TTB1120 - Manuel (Page 15)

15
! !
AlWAyS ENSURE THAT THE bATTERy IS DISCONNECTED PRIOR TO ANy
MAINTENANCE
Note:
The blades are designed to be reversible, thus extending their useful working life.
Changing the Floor Tool Blades
The floor-tool
Fig.39 Fig.40
Fig.38
To clean the floor-tool, remove securing-pin and disconnect the lifting strap and remove the floor tool securing pin
pull-free the floor tool from the rear of the machine.
Rinse the floor-tool assembly with clean water and refit.
Periodically the floor-tool blades should be examined and checked for wear and damage.
The blade removal is easy. Simply start by removing the four retaining pins (see Fig.38), turn the floor-tool over and
separate the blade carrier from the body (see Fig.39).Peel away the blades from their locating lugs (see Fig.40) and
examine or renew as required.
Replacement is a reversal of the removal process.
Floor-tool overview
1. Floor-tool main body
2. Rear blade
3. blade carrier
4. Front blade (slotted)
5. Retaining pins x 4
1
2
3
4
5
The TTB range is provided with the aluminium floor tool shown.