Electrolux EDC78550W - Manuel (Page 10)

Zoemer (Buzzer)
When the drying cycle has finished, an inter-
mittent audible signal will sound.
By depressing button Zoemer (Buzzer) the
acoustic signal is switched off in the follow-
ing cases:
• when selecting the programme
• when depressing the buttons
• when the programme selector dial is
turned to another position during the pro-
gramme or when you depress an option
button during the cycle
• at the end of the programme.
The corresponding light comes on
Droogtegraad (Dryness)
Press the Droogtegraad (Dryness) button re-
peatedly, to select the desired option. The
relevant light will light up. Laundry becomes
dryer from MIN to MAX. Press the Droogte-
graad (Dryness) button as many times as
necessary until the small light at the level of
residual dampness required is illuminated.
When the programme has finished the pilot
lights End is on.
Tijd (Time)
Use the TIJD (Time) button to select the pro-
gramme duration after setting the TIJD
programme. You can select a programme
duration from 20 min. to 3 hours in 10-mi-
nute steps.
1. Turn the programme selector to the
TIJD programme.
2. Press the TIJD (Time) button repeatedly
until the desired programme duration is
shown in the display, e.g.
for a programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
Startuitstel (Delay)
With the Startuitstel (Delay) button, you
can delay the start of a programme by
between 30 minutes (30') and a maxi-
mum of 20 hours (20h).
1. Select the programme and additional
functions.
2. Press the Startuitstel (Delay) button as
many times as necessary until the re-
quired time of the delay appears on the
display, e.g.
H if the programme
is to be started in 12 hours.
If the display is showing H and
you press the button again, the time de-
lay will be cancelled. The display will
show 0 and then the duration of the se-
lected programme.
3. To activate the delay timer, press the
START/PAUZE (Start/Pause) button.
The amount of time remaining until the
programme is set to start is continuous-
ly displayed (e.g. 15h, 14h, 13h, … 30'
etc).
Setting child lock
The child lock can be set to prevent a pro-
gramme being accidentally started or a pro-
gramme in operation being accidentally
changed. The child lock function locks all
buttons and the programme selector. The
child lock can be activated or deactivated
by holding down the DROOGTEGRAAD
(DRYNESS) and TIJD (Time) buttons simul-
taneously for 5 seconds.
– Before programme is started: Appli-
ance cannot be used
– After programme is started: Pro-
gramme in operation cannot be
changed
The icon appears in the display to indi-
cate that the child safety device is activated.
The child safety device is not deactivated
once the programme comes to an end.
If you want to set a new programme, you
must first deactivate the child safety device.
Starting the programme
Press the START/PAUZE Start/Pause but-
ton. The programme is started. The pro-
gramme progress display shows drying pro-
gress. The symbols for
Drying and
Coling appear in the display one after the
other. The number of droplets in the dry-
ness indicator gradually goes down as the
drying process progresses.
Changing programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
O off and then reset the programme.
10 electrolux