Electrolux EUF2947GOX - Manuel (Page 17)

The water hose must not be cracked,
squeezed or put in tight bends.
If this appliance has been purchased
together with the corresponding fridge the
installation should be conducted in such a
way that both appliances share the safety
valve supplied with the fridge.
Should this appliance instead have been
purchased as a single installation or
together with an appliance without water
connection, it is strongly recommended
that a safety valve (1504516–00/4) is
installed. This item can be ordered via
www.electrolux.com.
Before the appliance is placed in its final
location, ensure that the water connection
has been correctly carried out and that
there is no leakage at the connection to
the water tap.
Tighten the connections by hand only.
Make sure that the gasket is properly
positioned in the connector.
We recommend that the appliance is
placed on a "run-off" mat intended for
refrigerators and freezers, which makes it
easier to detect possible leakage.
8.7 Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet
using the adjustment spanner supplied.
8.8 Starting the ice maker for the
first time.
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
It will start filling water when the
temperature is sufficiently low.
1. Open the tap on the water
connection.
2. Start the freezer.
The ice maker starts automatically.
Do not use ice produced
during the first day to ensure
fresh taste.
8.9 Door reversibility
In case you want to change the opening
direction of the door, contact the nearest
After Sales Service Force. The After Sales
Service specialist will carry out the
reversibility of the doors at your cost.
9. NOISES
There are some sounds during normal
running (compressor, refrigerant
circulation).
ENGLISH 17