KITCHENAID 8284670 - Manuel (Page 4)

4
Countertop opening and clearance
dimensions that are shown must be
used. Given dimensions provide required
clearances.
Mobile home installation: The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such
standard is not applicable, the Standard
for Manufactured Home Installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 — latest
edition*, or with local codes.
In Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 — latest edition**, or with
local codes.
The cooktop is designed to hang from the
countertop by its side and rear flanges.
The gas and electric supply should be
located as shown in “Gas and Electric
Dimensions,” Page 5, so that they are
accessible without requiring removal of
the cooktop.
Provide an 4-11/16" x 6-7/8" (11.9 cm x
17.5 cm) cutout in left rear corner of
cutout enclosure to provide clearance for
gas inlet, power supply cord, and to allow
the rating label to be visible.
Copies of the standards listed may be
obtained from:
* National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269
** CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
Cabinet and Cutout
Dimemsions
Upper Cabinet
Clearance Dimensions
Cutout Dimensions
18" (45.7 cm) min.
clearance upper
cabinet to countertop
E min.
13" (33 cm) max.
upper cabinet depth
solid sides
and bottom
6-7/8" (17.5 cm)
1-3/32" (2.8 cm)
A
12-5/16" (31.3 cm)
min. clearance to
side wall - both sides
Dimensions shown are for
25" (63.5 cm) deep countertop and
24" (61 cm) deep base cabinet
22"
(55.9 cm)
see corner
notch detail
22"
(55.9 cm)
1-1/4"
(31.8 mm)
front face
of base
cabinet
CORNER
NOTCH
DETAIL
3/8"
(9.5 mm)
front face
of base
cabinet
4-11/16"
(11.9 cm)
2-3/16"
(5.6 cm)
7-1/4"
(18.4 cm)
A
D
B
C
cooktop A B C D E minimum
36" (91.4 cm) 36" 35-1/4" 36" (91.4 cm) island trim 2" (5.1 cm) 48" (121.9 cm)
(91.4 cm) (89.5 cm) 35-7/8" (91.1 cm) for
backguard 3" (7.6 cm)
non-combustible
zero clearance fit surface
48" (121.9 cm) 48" 47-1/4" 48" (121.9 cm) island trim 5" (12.7 cm) 48" (121.9 cm)
(121.9 cm) (120.0 cm) 47-7/8" (121.6 cm) for (see note) non-combustible
zero clearance fit backguard 3" (7.6 cm) surface
minimum distance to
combustible surface
top of countertop to
bottom of cabinet
Note: This installation requires a 27" (68,6 cm) deep custom countertop.