JVC RX-8040B - Manuel (Page 48)

46
English
Surround Modes Applicable to the Various Software
Available Surround modes vary depending on the speaker settings and the incoming signals.
The table below shows the relation of the Surround modes and the incoming signals (with the Zone 2 speakers, surround back speakers, and
6.1-channel reproduction mode setting).
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround
channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo) surround
signals.
Incoming Signal Type Zone 2 Speakers Surround Back Channel EX/ES/PLIIx Available Surround Mode
Setting Setting
Activated Not effective Not effective PLII MOVIE/PLII MUSIC/
PRO LOGIC/
NEO:6CINMA/NEO:6MUSIC
(3D-PHONIC)
Deactivated 2SPK/1SPK AUTO/ON/PLIIx MOVIE/ PLIIx MOVIE/PLIIx MUSIC/
PLIIx MUSIC PRO LOGIC/
NEO:6CINMA/NEO:6MUSIC
OFF PLII MOVIE/PLII MUSIC/
PRO LOGIC/
NEO:6CINMA/NEO:6MUSIC
NONE Not effective PLII MOVIE/PLII MUSIC/
PRO LOGIC/
NEO:6CINMA/NEO:6MUSIC
DVD MULTI Deactivated* 5 Not effective Not effective None
Incoming Signal Type Zone 2 Speakers Surround Back Channel EX/ES/PLIIx Available Surround Mode
Setting Setting
Dolby Digital EX Activated Not effective Not effective DOLBY D (3D-PHONIC)* 2
Deactivated 2SPK/1SPK AUTO/ON/PLIIx MOVIE DOLBY D EX* 1 * 3
PLIIx MUSIC DD + PLIIx MU
OFF DOLBY D
NONE AUTO/ON/PLIIx MOVIE/
DOLBY D (VIRTUAL SB)* 1 * 4
PLIIx MUSIC
OFF DOLBY D
Dolby Digital Activated Not effective Not effective DOLBY D (3D-PHONIC)* 2
(3/2, 2/2)
Deactivated 2SPK/1SPK ON/PLIIx MOVIE DOLBY D EX* 3
PLIIx MUSIC DD + PLIIx MU
AUTO/OFF DOLBY D
NONE ON/PLIIx MOVIE/
DOLBY D (VIRTUAL SB)* 4
PLIIx MUSIC
AUTO/OFF DOLBY D
Dolby Digital Activated Not effective Not effective DOLBY D (3D-PHONIC)* 2
(3/1, 2/1, 3/0, 1/0)
Deactivated Not effective Not effective DOLBY D
Dolby Digital Not effective Not effective Not effective
(Dual Mono)
DUAL MONO
* 1 When EX/ES/PLIIx
setting is set to
“AUTO,” “DOLBY D” is
applied to certain
softwares.
Analog
Linear PCM
Dolby Surround
Dolby Digital (2/0)
DTS (2/0)
* 5 When activating Zone 2 speakers, you cannot use the DVD MULTI playback mode.
42-50_8040[C].p65 04.5.14, 11:29 46