JVC RX-8040B - Manuel (Page 29)

27
English
To turn off the power (into standby mode),
press
STANDBY/ON again.
The STANDBY lamp lights up.
On the remote control:
1. Set ZONE 1/ZONE 2 selector to ZONE 2.
Now the buttons on the remote control work for Zone 2
operations.
2. Press AUDIO POWER ON.
The STANDBY lamp goes off, and the ZONE 2 indicator lights
up on the unit’s display.
• When connecting the Zone 2 front speakers to the
FRONT2/ZONE2 SPEAKERS terminal, see also “Setting
the Zone 2/Speakers 2 usage” on page 38, and “Activating the
Zone 2 Front Speakers” on page 29.
To turn off the power (into standby mode),
press AUDIO POWER STANDBY.
The STANDBY lamp lights up.
Notes:
• A small amount of power is consumed in standby mode. To turn the
power off completely, unplug the AC power cord.
• If you have turned off the receiver with the volume level set at more
than level “30,” the volume level will be automatically set at level
“30” next time you turn on the receiver.
Canceling the Zone 2 Operations
On the front panel:
To stop Zone 2 operations and sounds from the Zone 2 speakers,
press ZONE 2 ON/OFF so that the ZONE 2 indicator goes off from
the display.
No sound will be heard in Zone 2, and the display changes to show
the Zone 1 source.
To use this receiver for Zone 2 operations again
1. Press ZONE 2 ON/OFF again so that the ZONE 2 indicator
lights up on the display.
2. Press ZONE 2 CONTROL so that “ZONE2” and the
previously selected Zone 2 source name appear on the
display.
On the remote control:
To stop Zone 2 operations and sounds from the Zone 2 speakers,
press ZONE 2 ON/OFF so that the ZONE 2 indicator on the unit’s
display goes off.
To use this receiver for Zone 2 operations again, press
ZONE 2 ON/OFF again (the ZONE 2 indicator lights up).
Note:
If “TURN ON ZONE1 OR ZONE2” appears on the unit’s display, press
ZONE 1 ON/OFF or ZONE 2 ON/OFF to listen to the sound in Zone 1
or in Zone 2; otherwise, the receiver will turn off after about 1 minute.
AUDIO POWER
ZONE 2 ZONE 1 STANDBY ON
ZONE 2 ZONE 2 ZONE 1
LINEAR PCM
VOLUME
SPEAKERS 1 ZONE 2
LINEAR PCM L R
ANALOG
VOLUME
SPEAKERS 1
ZONE 1
ZONE 2
ZONE 1
ON/OFF
ZONE 2 ZONE 1
ZONE 2
ZONE 2
16-29_8040[C].p65 04.5.14, 11:29 27