Monster Power HTUPS500 - Manuel (Page 11)

6
HTUPS 500 FEATURES
1. Battery Runtime LED Bar: Indicates battery charge level during normal operation or remaining runtime
during battery mode.
2. Overload Protection: Indicates if the Line and Neutral wires from the wall outlet to the HTUPS
are reversed. Please consult your electrician to correct this immediately.
3. Battery Check: When lighted up, it indicates the battery is either needing charging or it has reached its service life.
4. “Clean Power On” Indicator: Indicates Monster Clean Power circuitry is functioning properly.
5. “Power On” Light: Indicates unit is turned on.
6. Power “ON/OFF” Button: Turns on the HTUPS if pressed for 1 second. Turns off the HTUPS if pressed for 3 seconds.
7. “Mute/Test” Button: Turns off the audible alarm when pressed momentarily, puts the HTUPS to Test mode if
pressed for 3 seconds.
8. IR Controller “Learn” Button: Puts the HTUPS’s IR controller in “Learn” mode.
9. Learn Green LED: Indicates that the HTUPS’s remote controller is in “Learn” mode.
10. IR Controller “Test” Button: Puts the HTUPS’s remote controller to test mode.
11. IR Transmitter Interface-3.5mm mono jack: Connection jack for IR emitter or blaster.