Hoover Central Vacuum Systems - Manuel (Page 3)

3
Description
1. Assembly
1. Motor Module
2. Motor Exhaust
3. Pipe Inlet
4. Utility Inlet
5. Dust Contiainer
6.Filtration
Module
7. Controls
See right for
details
Low Voltage
1-3
On/Off Switch
Over Load Protector
Operate cleaning system only at
voltage specified on power unit.
This system is intended for house-
hold use.
Grounding
Instructions
This appliance must be grounded . If it
should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to
reduce the risk of electric shock. This
appliance is equipped with a cord hav-
ing an equipment-grounding conductor
and grounding plug (A). The plug must
be plugged into an appropriate outlet
(B) that is properly installed and
grounded in accordance with all local
codes and ordinances (see page 5).
DANGER-
Improper connection of the equipment-
grounding conductor can result in the
risk of electric shock. Check with a
qualified electrician or service person if
you are in doubt as to whether the outlet
is properly grounded.
Do not modify
the plug provided with the appliance -
if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is for use on a nominal
120 volt circuit and has a grounding
plug that looks like the plug illustrated in
sketch (A).
A
Temporary adapter (C) may be used
to connect this plug to a 2-pole recepta-
cle (D) if a properly grounded outlet is
not available. The
Temporary adapter
should be used only until a properly
grounded outlet (B) can be installed by
a qualified electrician. The green col-
ored rigid ear, lug, or the like extending
from the adapter must be connected to
a permanent ground such as a properly
grounded outlet box cover. Whenever
the adapter is used, it must be held in
place by a metal screw.
1-1
1-2
NOTE: In Canada, the use of a tempo-
rary adaptor is Not Permitted by the
Canadian Electrical Code.
(A)
(B)
(C)
(D)
Grounding Pin
Adapter
Tab for
Grounding
Screw
Metal Screw