Electrolux 96901K - Manuel (Page 34)

34
Installation instructions
Technical data
Appliance dimensions
Cut-out dimensions
Safety instructions
The appliance may only be mounted and electrically connected by trained and authorised
specialised personnel.
The general guidelines for the operation of electrical appliances, the regulations of the
responsible utility company and the specifications in this assembly manual are to be
observed.
With regard to fire protection this appliance complies with EN 60 335-2-6. Only this type of
appliance may be installed with a high cupboard or wall on one side.
Appliance assembly
The appliance must be disconnected from the mains power supply during mounting,
dismantling and servicing.
On unpacking the appliance please ensure that it is intact and check for evidence of
transportation damage. Damaged appliances must not be mounted or connected.
The supplier and forwarding company must be notified of any transportation damage
immediately.
The packaging should be disposed of in an environment-friendly manner.
The required minimum distances to other appliances (refer to their technical specifications)
in your kitchen must be maintained.
Width 766 mm
Depth 506 mm
Height 47 mm
Width 750 mm
Depth 490 mm
Corner radius R5
Please observe these instructions otherwise guarantee claims on the manufacturer
will be nullified.