DE DIETRICH DVI330 - Manuel (Page 23)

Starting and running a programme Présentation de votre lave-vaisselle
43 42
GB
GB
Starting and running a programme
Starting the programme immedi-
ately
Switch the machine on and select your
programme. Press the “Start” button.
The “Remaining Time” light illuminates
and the display shows the time to the
end of the programme in minutes.
When the time is more than 99 minutes,
the display shows
.
Programme end
The “Remaining Time” light goes out
and the display shows “
” until the
door is opened.
Once the door is opened, the display
returns to showing the length of the
previously selected programme.
Delayed Start Time
Delaying the start of the pro-
gramme
After selecting your programme, press
the “Delayed Start” button one to 24
times to set your chosen delay: 1, 2, 3,
4 hours … up to a maximum of 24 hours.
Confirm by pressing “Start”.
Pressing the button after setting a delay
of 24 hours displays the length of the
programme again (immediate start).
Programme
time
remaining
Extra drying option:
You can activate this option by
holding down the “ICS” button
and pressing “Start”. The display
shows “
”.
Cancelling a programme
Hold down the “Start / Cancel”
button until the display shows
“
”.
You can then choose a new pro-
gramme.
The safety systems
Filling level:
The light illuminates when the
reservoir is empty.
Door poorly closed:
The light for the selected programme flashes.
Salt Rinsing Agent
You can deactivate this function (as an energy-saving measure). To do
so, repeat the operation. The display goes out.
Intelligent Control System :
These programmes produce savings through
automatic detection of the level of soil-
ing and the amount to be washed.
Start/
Cancel
Start/
Cancel
Start/
Cancel