Radson 4 Zones RF Clock - Manuel (Page 9)

9
2.3 RF installation
2.3.1 RF Installation with thermostat receiver
a) Press on the (OK)
key to enter in the “RF init” mode, you
can now choose the zone which needs to be configured
by moving the frame cursor (around number 1) with
(◄-)
and
(►+) keys on the desired zone number, 1 to 4.
b) Once the zone selected, press on the (OK) key and
choose if you want to use it with
(◄-) and (►+) “Yes” or
“no”,
-
If you choose “no” the zone will be not displayed on the
main screen, then choose another one.
-
If you choose “Yes” the following screen must be
displayed and the clock will start to send now the radio
configuration signal to the receiver.