Danby DWC518BLS - Manuel (Page 8)

Operating Instructions
7
Shelf Instructions
To remove a roller-shelf (Fig.C) :
1. Gently slide the shelf outward
until it meets resistance.
2. Tilt the shelf slightly upwards
(approximately 15°) and
carefully remove the shelf by
sliding it outward from the
cabinet.
To reinstall a roller-shelf:
1. Set the shelf’s wheels upon
the front of the wheel track.
2. Tilt the front of the shelf
slightly upwards (approxi-
mately 15°), and begin to
gently slide the shelf into the
cabinet until the shelf’s roller-
wheels slide naturally within
the wheel track.
To remove the bottom shelf:
1. Grasp the top, wooden area
of the shelf with your hand.
2. While grasping the shelf,
gently apply upward
pressure to the back of the
shelf and downward
pressure to the front of the
shelf.
3. Begin to slowly pull the shelf
outward until it unhooks
from the stoppers, and then
remove the shelf from the
cabinet.
To reinstall the bottom shelf (Fig.
D):
1. Slide the shelf beneath the
track that is directly above
the track you want the shelf
to rest on.
2. Once the back-end of the
shelf is in contact with the
back wall of the cabinet,
lower the shelf onto the
track.
Fig. C
1
2
15°
IMPORTANT!
Do not cover any part of the shelves with aluminum foil or any other mate-
rial that will prevent adequate air circulation within the cabinet.
1
2
Fig. D
In order to achieve the maximum
storage capacity of fifty-one (51)
bottles, it will be necessary to posi-
tion the bottles alternately on the
upper five (5) shelves, as shown in
Fig A. This will allow for the stor-
age of nine (9) 750 ml bottles per
shelf in each of the top five
shelves, and six (6) bottles on the
bottom shelf (Fig B), for a total
storage capacity of fifty-one (51)
wine bottles.
Wine
Storage
The * maximum capacity of
the DWC518BLS is 51
(750ml) wine bottles.
* When stocked as per
instructions
Fig A
Fig B