Danby DWC518BLS - Manuel (Page 7)

6
Operating Instructions
Setting the
Temperature
The Controls of your
Wine Cooler
C
F
C
F
RUN
Activation
Upper chamber
CHAMBRE SUPÉRIEURE
Lower chamber
CHAMBRE INFÉRIEURE
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE
1. Run: Indicator light illuminates to signify that
the cooling mode is currently in operation.
2. Upper chamber display: Display screen
shows current cabinet temperature and set
temperature of the upper zone.
3. Lower chamber display: Display screen
shows current cabinet temperature and set
temperature of the lower zone.
4. °C/°F: Adjacent indicator light denotes which
scale of temperature is displayed.
5. ‘Set Upper’ button: Used to set the
temperature in the upper zone (see ‘Setting
the Temperature’ below).
‘Set Lower’ button: Used to set the
temperature in the lower zone (see ‘Setting
the Temperature’ below).
1
2 3
5
4
• To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the ‘Set Upper’ and
‘Set Lower’ control buttons
simultaneously for approxi-
mately five (5) seconds.
• The temperature range can
be set as low as 39°F (4°C) or
as high as 64°F (18°C) to suit
your specific wine storage
requirements. Each depression
of the ‘Set Upper’ or ‘Set Lower’
button will allow you to adjust
the temperature in 1° incre-
ments within the aforemen-
tioned range.
• You may view your ‘set’ tem-
perature at any time by briefly
depressing either the ‘Set
Upper’ or ‘Set Lower’ button.
The
set temperature will flash
in the display area for 5 sec-
onds before the display
resumes showing the
current
cabinet temperature.
I M P O R TA N T !
In the event of a power failure,
wait 3 to 5 minutes before
restarting.